<% Response.Status="301 Moved Permanently" Response.AddHeader "Location", "http://www.cuttersedge.com/Products/CE101CFireRescueConcreteChainSaw/ConcreteSawingKit/tabid/79/Default.aspx" %> Products
 
CE101C Concrete Saw Specifications

MODEL CE101C FEATURES:

  • 6.2 cubic inch (101 cc) engine designed specifically for wet cutting concrete and the abrasive wet cutting rescue environment with special crankshaft, throttle linkage and carburetor sealing, and a special air filtration design.
  • Patented WallWalker® System
  • GCP SealPro Diamond Chain
  • Lightweight magnesium castings
  • Rubber coated bottom
  • Starter spring lubrication port
  • Simple maintenance requirements
 
ENGINE TYPE
2-Stroke Single Cylinder Air-Cooled

DISPLACEMENT
6.2 cu. in (101 cc)

IGNITION
Water resistant electronic ignition

HORSEPOWER
6.5 HP @ 8700 RPM

ENGINE SPEED
11,500 ± 500 RPM, mechanically governed

CHAIN SPEED
5500 fpm (28 m/s), free running

CLUTCH
Three weight, single spring, water and concrete proofed.

FUEL CAPACITY
0.26 gal (1 liter) 15-18 minutes per tank, continuous full-load operation.

CARBURETOR
Walbro WGAK3, throttle shaft sealed

WEIGHT
27.5 lbs. (12.5 kg)
CUTTING DEPTH
12 inches (30 cm)
14 inches (36 cm)

DIMENSIONS
23 in. (58 cm) Length
14 in. (36 cm) Height
12 in. (30 cm) Width

WATER SUPPLY
20 psi (1.5 bar) recommended; 2 gpm (7.5 liters/min) minimum

NOISE LEVEL
102 db @ 1 meter

VIBRATION LEVEL
8 meters/see (front handle)

CUTTING RATE
Hard aggregates and steel:
15-25 in2/min (160-190 cm2/min)
Medium aggregates:
20-30 in2/min (160-190 cm2/min)
Masonry, block, brick:
30-50 in2/min (190-320 cm2/min)

STARTER
Dust and water shielded with lubricant port
   

STANDARD ACCESSORIES
Accessories included with the Gasoline Powered Concrete Cutting Chainsaw include:
Scrench Tool & Tool Holder, Tool Kit, Filter Recharge Kit, Cutters Edge 2-cycle Oil Mix, and complete Operators Manual.

Specifications subject to change without notice

Back to Concrete Saw Overview

 
 
P.O. Box 1179
Julian, CA 92036-1179
US and Canada 1-800-433-3716
International Customers 760-765-0597
Fax 760-765-0594
Email info@cuttersedge.com

©2002 Cutters Edge®. All rights reserved.