Cutters Edge
Need Answers? Call Us at 1-800-433-3716
 
Search Site    Go
Products » CE94CRS Concrete Cutting Chainsaw Minimize

CE94CRS Concrete Cutting Chainsaw

Products » CE94CRS Concrete Cutting Chainsaw

 

The New CE94CRS Gasoline Powered Concrete Cutting Chainsaw cuts reinforced concrete up to 16-inches thick and cuts it up to 40% Faster with the new CE7COI™ Diamond Chain that features diamond cutting segments on every chain link – up to 30% more diamond cutting surface area in contact with the concrete being cut.

Additional Features Include:

 -  Full-Wrap Handle – for safe, all- position cutting

- Wallwalker® – Power Transfer Device for fast and efficient concrete cutting

 - 3-Axis 360° Swivel Water Hose Connector -  keeps water supply hose out of the way during cutting and prevents kinking

 - Momentary ON/OFF Contact Switch – always in the “On” position for reliable starts and eliminates possibility of flooding

 - Muffler Exhaust Port Cover – prevents water from entering engine through muffler

  - Flame Coated Guide Bar – with internal water galleries

The New CE94CRS Gasoline Powered Concrete Cutting Chainsaw cuts reinforced concrete up to 16-inches thick and cuts it up to 40% Faster with the new CE7COI™ Diamond Chain that features diamond cutting segments on every chain link – up to 30% more diamond cutting surface area in contact with the concrete being cut.

Additional Features Include:

 -  Full-Wrap Handle – for safe, all- position cutting

- Wallwalker® – Power Transfer Device for fast and efficient concrete cutting

 - 3-Axis 360° Swivel Water Hose Connector -  keeps water supply hose out of the way during cutting and prevents kinking

 - Momentary ON/OFF Contact Switch – always in the “On” position for reliable starts and eliminates possibility of flooding

 - Muffler Exhaust Port Cover – prevents water from entering engine through muffler

  - Flame Coated Guide Bar – with internal water galleries

Saw Features Minimize
Engine Type 2-Stroke, Air-Cooled
Displacement 5.7 cu]n (94cc)
Horsepower 6.4 hp (4.BkW)@ 9000 rpm
Torque 50,4 in-lbs (5.7 Nm)@ 7,200 rpm
Engine Speed 9,300 +/- 150 rpm (max)
2,7A0 +l- 100 rpm (idle)
Spark Plug NGK BPMRTA or Champion RCJ6Y
Electrode gap 0.020 in (0.5 mm)
Weight 22.25 lbs(1 0. 1 kg) Powerhead only
Dimensions 18 in (46 cm)length
14 in (36 cm) height
13 in (33.02 cm)width
Air Filter Water Resistant PolYester
Carburetor Walbro RXJ-5A, Throttle Shaft Sealed
Starter Dust and water resistant
lgnition Momentary contact On/Off switch
Clutch Centrifugal, Three Shoes, Three Springs
Water and Concrete Slurry Sealed
Fuel Ratio 100:1 Cutters Edge Synthetic 2-cycle Oil
Or 25'l Petroleum Based 2-cycle Oil
FuelCapacity 0.26Gallon(l Liter)
Water Supply Minimum 50 psi(3.45 BAR)
Water Flow Minimum 2.5 gpm (7.5 liters/min)
Noise Leve 106 dB(A)at 3 ft ('l m)
Vibration Level 3.9 m/s (front handle
4.1 m/s (rear handle)
Diamond Chain #CE7COI
Available Bar  
Lengths 12-inch (30.48 cm)
14-ineh (35.56 cm)
16-inch (40.64 cm)

Corporate Headquarters and Factory

CUTTERS EDGE
Division of Edge Industries

P.O. Box 846
3855 23rd Street, Baker City, Oregon 97814

Toll Free: 1-800-433-3716
Telephone: 541-524-9999
Fax: 541-524-9996
Email: info@cuttersedge.com

For After Hours Technical Assistance 7/24/365
Call or Text Lead Technician Steve Overbay at
(Cell) 541-403-2652. We are in Pacific Standard (PST) Time Zone

Authorized Service Center

 

Eastern Fire Equipment Services

326 Pleasant View Road, New Cumberland, PA 17070
Telephone: 717-412-7746
Fax: 717-412-7747
Email: office@efesinc.com

Copyright 2011 Cutters Edge