May, 2005- Baker City, Oregon - Cutters Edge has introduced the CE2172RS MULTI-CUT® Fire Rescue Saw, the first of three MULTI-CUT® Saws featuring a new engine that delivers 10% more horsepower with higher torque. According to Thomas Ruzich, president of Cutters Edge: “This new engine design not only delivers more power it also generates fewer emissions and is more fuel efficient.”

The CE2172 NEXT GENERATION TECHNOLOGY” engine utilizes dual intakes: one for clean-air and one for fuel-air mixture. The clean-air intake forms a barrier that delays the fresh fuel mix from entering the engine while assisting in exhausting the burned gases. Then the fuel-air mixture slushes into the engine, resulting in more power and less emissions, compared to conventional 2-stroke engines.

For more information on the “NEXT GENERATION TECHNOLOGY” MULTI-CUT® Fire Rescue Saws contact Cutters Edge at: 1800-433-3716 or Email:info@cuttersedge.com

The “NEXT GENERATION TECHNOLOGY” gasoline-powered Concrete Cutting Chainsaw is lighter weight, has more torque and cuts reinforced concrete up to 16-inches thick 40% faster with the new CE7COI™ Diamond Chain. The CE94CRS is powered by a 5.7 cu in (94cc) engine developed specifically for concrete cutting. A 23-piece Concrete Sawing Kit is available and contains everything needed to cut concrete anywhere in a rugged and lockable Diamond Plate Aluminum case.

For more information on the new CE94CRS Concrete Cutting Chainsaw contact Cutters Edge at: 1-800-433-3716 or Email: info@cuttersedge.com

The NEW 2186-RS MULTI-CUT® Fire Rescue Saw delivers more power (84.7cc – 6.9HP) and the ability to make larger cuts – up to 24-inches, in any and all materials found on the fireground.

June, 2010 – Baker City, OR - Cutters Edge has introduced the CE807R Rotary Rescue Saw featuring a powerful 80.7cc engine with a 4-Stage Air Filtration System to assure outstanding performance in any cutting situation.

Cutters Edge CE735R was recently featured in theAsian Pacific Firefighter Magazine

The new TS10 Tool Sling from Cutters Edge is designed to work on all saws and many hand tools, too. With the TS10 holding the saw both hands remain free, especially important when climbing ladders.

Announcing a New East Coast Service Center for Cutters Edge: Eastern Fire Equipment Services located in  New Cumberland, PA.  An Authorized Factory Service Center For All Cutters Edge Fire Rescue Saws Including: BULLET Chain Repair and Sharpening

This new service center is operated by Alan Kumpf & Ray Smeriglio

Contact Info:
Eastern Fire Equipment Services
326 Pleasant View Road
New Cumberland, PA
17070
Phone: 717-412-7746
Fax: 717-412-7747
Email: office@efesinc.com

We bought four of your Rotary Rescue Saws just prior to deploying last October and they have been functioning great.

According to Chief Doug Krill, the saw still runs great and is ready for action.

Teams of two were required to wear full Turnout gear and a Scott SCBA and competed against each other and the clock using Cutters Edge Saws and hand tools to complete the following Challenges

Hundreds of spectators who attended the Firefighter Combat Challenge in San Diego on Saturday, July 19th also witnessed the First Cutters Edge Truck Company Challenge Competition.

Cutters Edge has introduced a new high speed cutting blade for rotary saws called the
Black Diamond. This new blade fits all rotary saws and is available in 12”, 4” and 16” sizes.

Read Homer Robertson's review of the Cutters Edge Black STAR Diamond Blade from the August, 2007 issue of Fire Rescue Magazine. (PDF)

 On November 6th and 7th, The Lewisville, Texas Fire Department held Heavy Rescue Classes for 60 people representing 6 Departments and Three Rescue Units.

The Battalion follows the men and women of the San Francisco Fire Department as they face danger on a daily basis. Each weekly episode offers us a glimpse into what motivates these unique individuals whose job is to rescue and save the lives of total strangers.

May, 2005- Baker City, Oregon - Cutters Edge has introduced the CE2172RS MULTI-CUT® Fire Rescue Saw, the first of three MULTI-CUT® Saws featuring a new engine that delivers 10% more horsepower with higher torque. According to Thomas Ruzich, president of Cutters Edge: “This new engine design not only delivers more power it also generates fewer emissions and is more fuel efficient.”

The CE2172 NEXT GENERATION TECHNOLOGY” engine utilizes dual intakes: one for clean-air and one for fuel-air mixture. The clean-air intake forms a barrier that delays the fresh fuel mix from entering the engine while assisting in exhausting the burned gases. Then the fuel-air mixture slushes into the engine, resulting in more power and less emissions, compared to conventional 2-stroke engines.

For more information on the “NEXT GENERATION TECHNOLOGY” MULTI-CUT® Fire Rescue Saws contact Cutters Edge at: 1800-433-3716 or Email:info@cuttersedge.com

The “NEXT GENERATION TECHNOLOGY” gasoline-powered Concrete Cutting Chainsaw is lighter weight, has more torque and cuts reinforced concrete up to 16-inches thick 40% faster with the new CE7COI™ Diamond Chain. The CE94CRS is powered by a 5.7 cu in (94cc) engine developed specifically for concrete cutting. A 23-piece Concrete Sawing Kit is available and contains everything needed to cut concrete anywhere in a rugged and lockable Diamond Plate Aluminum case.

For more information on the new CE94CRS Concrete Cutting Chainsaw contact Cutters Edge at: 1-800-433-3716 or Email: info@cuttersedge.com

The NEW 2186-RS MULTI-CUT® Fire Rescue Saw delivers more power (84.7cc – 6.9HP) and the ability to make larger cuts – up to 24-inches, in any and all materials found on the fireground.

June, 2010 – Baker City, OR - Cutters Edge has introduced the CE807R Rotary Rescue Saw featuring a powerful 80.7cc engine with a 4-Stage Air Filtration System to assure outstanding performance in any cutting situation.

Cutters Edge CE735R was recently featured in theAsian Pacific Firefighter Magazine

The new TS10 Tool Sling from Cutters Edge is designed to work on all saws and many hand tools, too. With the TS10 holding the saw both hands remain free, especially important when climbing ladders.

Announcing a New East Coast Service Center for Cutters Edge: Eastern Fire Equipment Services located in  New Cumberland, PA.  An Authorized Factory Service Center For All Cutters Edge Fire Rescue Saws Including: BULLET Chain Repair and Sharpening

This new service center is operated by Alan Kumpf & Ray Smeriglio

Contact Info:
Eastern Fire Equipment Services
326 Pleasant View Road
New Cumberland, PA
17070
Phone: 717-412-7746
Fax: 717-412-7747
Email: office@efesinc.com

We bought four of your Rotary Rescue Saws just prior to deploying last October and they have been functioning great.

According to Chief Doug Krill, the saw still runs great and is ready for action.

Teams of two were required to wear full Turnout gear and a Scott SCBA and competed against each other and the clock using Cutters Edge Saws and hand tools to complete the following Challenges

Hundreds of spectators who attended the Firefighter Combat Challenge in San Diego on Saturday, July 19th also witnessed the First Cutters Edge Truck Company Challenge Competition.

Cutters Edge has introduced a new high speed cutting blade for rotary saws called the
Black Diamond. This new blade fits all rotary saws and is available in 12”, 4” and 16” sizes.

Read Homer Robertson's review of the Cutters Edge Black STAR Diamond Blade from the August, 2007 issue of Fire Rescue Magazine. (PDF)

 On November 6th and 7th, The Lewisville, Texas Fire Department held Heavy Rescue Classes for 60 people representing 6 Departments and Three Rescue Units.

The Battalion follows the men and women of the San Francisco Fire Department as they face danger on a daily basis. Each weekly episode offers us a glimpse into what motivates these unique individuals whose job is to rescue and save the lives of total strangers.